Posted on Leave a comment

Pineapple Popsicles

The Pineapple juice from your Norwalk makes a sweet treat for a hot summer day. Pour your freshly made pineapple juice into a popsicle mold, freeze overnight, and enjoy pineapple popsicles from your Norwalk.

Here are some helpful tips for juicing and storing your pineapple juice.

There is no need to grind the pineapple for juicing. All of the juice will be extracted using only the Hydraulic Press. Flat cloths come folded in thirds and should always be used and stored this way. Place one slice of pineapple into the center third of the flat cloth. Fold the cloth into thirds now, keeping the pineapple slice in the center third. Place the folded cloth onto the center of the juice tray. Repeat steps for the 2nd cloth. Always juice with 2 cloths. Make sure the juice tray is centered on the press plate.

Turn on your Norwalk, and turn the press lever to press your juice.

Empty the dry pulp from the flat cloths into the trash and repeat the juicing process until you’ve pressed all of the pineapple slices.

Juice needs to be stored quickly to stay fresh and reduce oxidation. Pour into small glass jars for storing in the refrigerator, leaving only enough room at the top of the jar for the lid. This ensures there is limited oxygen in the jar, and will keep your juice fresh longer.

If freezing, leave 3/4 to an inch of room in the top of the jar for expansion.

Posted on Leave a comment


More than a Juicer.

Many types of cheeses may be grated in the Norwalk. The type of grind obtained will vary with the consistency and temperature of the cheese. Hard cheeses can be easily grated in the Norwalk. New or soft cheeses should be chilled before grinding for good results. Triturate only.

  • Use Grid #0 for coarse texture.
  • Use Grid #1 for fine texture.
  • Use Grid #2 for very fine.
  • Use Grid #3 or #4 for cottage cheese to be used in place of sour cream or cream cheese in dips.

Fill the housing loosely with cheese. Hold the pusher over the cheese before turning on the Norwalk. Triturate using light pressure on the pusher. Keep the housing partially full at all times to prevent throwback. When finished, leave the pusher in the feed tube until you have turned off the Norwalk.